POLI-FLEX® 4950 Chalkboard Flex Film
Flex film for writing with chalk
Product number:
POLI-FLEX 4950
Product information
POLI-FLEX® 4950 Chalkboard Flex Film
POLI-FLEX® 4950 Chalkboard has a special PU surface and can be written on with chalk after pressing. The chalk can be easily removed with a damp cloth.
Due to the low transfer temperature POLI-FLEX 4950® Chalkboard is also suitable for heat sensitive textiles.
Material: Polyurethane, 95 µ.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 130 °C / 150 °C / 160 °C |
| Pressing time | 5 Sekunden / 4 Sekunden / 3 Sekunden |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Warm |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 120 g | Cricut: - | Cameo: 7 | Juliet: 10-15 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.