POLI-FLEX® Nylon Flex Film
Flex film for nylon fabrics
Product information
POLI-FLEX® Nylon Flex Film
POLI-FLEX® Nylon is a 100 µ polyurethane flex film with a special hot melt adhesive for marking nylon fabrics. The self-adhesive liner guarantees best cutting and weeding properties and allows better positioning on the textile.
The retroreflective POLI-FLEX® Reflex Nylon is an approx. 180 microns thick fabric with metallised micro glass beads. The photometric values of POLI-FLEX® Reflex Nylon comply with the EN 471 standard (class 2).
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 150 °C |
| Pressing time | 4 seconds |
| Contact pressure | Low, 2,0 Bar |
| Pull off the backing material | Warm |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 90 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
| Notice | Press for 10 seconds after peeling carrier |
Always carry out application tests on the original material.