PRICE REDUCED
POLI-FLEX® TURBO® Bright Flex Film
Flex film with glossy metallic effect
Product number:
TURBO BRIGHT
Product information
POLI-FLEX® TURBO® Bright Flex Film
The bright colours from the POLI-FLEX® TURBO® series have an elegant metallic sheen and are ideal for high quality lettering on cotton, polyester (non-resublimating) and blended fabrics.
POLI-FLEX® TURBO® is a high quality 95 µ PU flex film with a very short pressing time, making it suitable for heat sensitive fabrics.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Ja |
|---|---|
| Pressing temperature | 130 °C / 150 °C / 160 °C |
| Pressing time | 5 seconds / 4 seconds / 3 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Hot |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 80 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
| Notice | Not for multi-layer application. |
Always carry out application tests on the original material.