POLI-FLEX® TURBO® Reflex Flex Film
Retroreflective flex film
Product number:
TURBO REFLEX
Product information
POLI-FLEX® TURBO® Reflex Flex Film
POLI-FLEX® TURBO® Reflex is a retroreflective flex film for use on sports and leisure wear. Due to its low transfer temperature, POLI-FLEX® TURBO® Reflex is also suitable for heat-sensitive textiles.
Material: Effect film with metallised micro glass beads, 200 µ.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | Polyester 130 °C | cotton 160 °C |
| Pressing time | 5 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Warm |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium-Feinschnittklinge | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 100 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.