Siser Colorprint
Solvent Flex gloss
Product number:
COLORPRINT
Product information
Siser Colorprint Solvent Flex
Siser® Colorprint® is a high quality printable white PVC flex film with a glossy finish.
Siser® Colorprint® is used for textile decoration of cotton, polyester and their blends. The film has a thickness of 170 µ, is very opaque and has an excellent ink adhesion and colour brilliance. Wash resistance up to 60°C.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | No |
|---|---|
| Pressing temperature | 150 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Warm, we recommend Siser T.T.D. Advanced |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 80 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
| Notice | Ink-compatability: ECO-SOL MAX | ECO-SOL MAX 3 | TrueVIS 2 | EUV | EUV-2 | EUV5 | SS21 | Latex 1xx - 3xx | Latex 5xx |
Always carry out application tests on the original material.