Siser® Easy Subli Flex Film
Subli Flex
Product number:
EASY SUBLI
Product information
Siser® Easy Subli Flex Film
Siser® Easy Subli is a printable flex film with 220 µ thickness. The film is printed directly with sublimation ink.
Please note the Siser® Easy Subli processing video on the foil direct YouTube channel.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
We recommend the following printing parameters:
Paper type: Glossy, Priority: Quality, Profile: Photo. Print tests are essential.
| Mirror subject | No |
|---|---|
| Pressing temperature | 155 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Warm |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 120 g | Cricut: - | Cameo: 8 | Juliet: 20-25 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
| Notice | Cover with siliconised paper when pressing. To transfer the print onto the textile we recommend the heat resistant application tape Siser T.T.D. Easy |
Always carry out application tests on the original material.