Siser® EasyColor™ DTV™
Sheets A4 or A3
Product information
Siser® EasyColor™ DTV™
Siser® EasyColor™ DTV™ is an all-new printable heat transfer vinyl utilizing the technology that Siser® calls DTV (Direct To Vinyl) that works with inkjet printers.
Yes, this means that you can finally print out full-color designs on HTV using nothing more than your typical desktop printer at home! Unlike other materials that rely on solvent, eco solvent, or even sublimation systems, there are no new setups or expensive equipment purchases needed to use Siser® EasyColor™ DTV™. Simply feed Siser® EasyColor™ DTV™ into your printer like any other piece of paper, and you’re ready to print!
Specially formulated for inkjet printers, Siser® EasyColor™ DTV™ retains the high quality you expect from a Siser® product. Offering extreme flexibility, your designs will not only stretch, but feel soft and comfortable to wear as well. Color vibrancy also remains excellent even after going through multiple washing cycles, and you won’t see Siser® EasyColor™ DTV™ crack or peel like other inkjet transfers!
Siser® EasyColor™ DTV™ can be cut with scissors or fed through a variety of cutters after printing. Masking is done using the same TTD Advanced that is already used with many of our other printable products.
And yes, Siser® EasyColor™ DTV™ is also compatible with solvent and eco-solvent systems!
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | No |
|---|---|
| Pressing temperature | 155 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Warm |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 90 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.