Siser® Glitter Flex Film
Flex film with glitter particles
- White suitable for dye-sub printing
Product information
Siser® Glitter Flex Film
Flex film with the ultimate glitter effect!
Siser® Glitter has coarse glitter particles for expressive graphics. Use Siser® Glitter flex film to make a statement or create larger designs with a striking glitter look.
Siser® Glitter is PU based and suitable for transfer onto cotton, polyester (non-resublimating) and their blends. The average thickness is 350 µ.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 160 °C |
| Pressing time | 15 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Pull off the backing material | Cold / warm |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 120 g | Cricut: - | Cameo: 8 | Juliet: 20-25 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.
Related products
Up-sells
