Siser® Hi-5 Flex Film
Flex film for turbo-fast transfers
Product information
Siser® Hi-5 Flex Film
Siser® Hi-5 Flex Film with low press temperature and short press time, suitable for
T-shirts ✓Casual wear ✓ Merchandise ✓ and more.
Siser® Hi-5 Flex Film with a press time of only 5 seconds for turbo-fast flex film transfers. Thanks to the low transfer temperature of only 120°C, Hi-5 is suitable even for sensitive textiles.
Siser® Hi-5 Flex Film is only 90µ thick, has a soft and smooth touch and is suitable for most non-resublimating textiles. The low transfer temperature reduces the risk of unwanted glossing effects and heat damage on thin synthetic fabrics.
.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 120 °C for textiles < 150 g/m² | 150 °C for textiles > 150 g/m² |
| Pressing time | 5 seconds |
| Contact pressure | High, 3,5 - 5,0 Bar |
| Pull off the backing material | Warm |
| Washable up to | 60 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium-Feinschnittklinge | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 80 g | Cricut: - | Cameo: 6 | Juliet 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.