Siser® S-Print® Flex
Solvent flex water-based
Product number:
S-PRINT
Product information
Siser® S-Print®
Siser® S-Print®, the water-based material that allows you to print any design quickly and easily on cotton, polyester, stretch and cotton/PES blends.
The low transfer temperature, combined with the excellent processing properties and the soft touch, guarantee high quality results in a short time.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | No |
|---|---|
| Pressing temperature | 120 °C | 150 °C |
| Pressing time | 5 seconds (textiles 160 g/qm), 150°C (textiles >160 g/qm) |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Warm, we recommend Siser T.T.D. Easy |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium-Feinschnittklinge | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 90 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
| Notice | Ink-compatability: ECO-SOL MAX | ECO-SOL MAX 3 | TrueVIS | TrueVIS 2 | EUV5 | SS21 |UV LUS 170 | UV LUS 190 |
Always carry out application tests on the original material.