Product information

Subli-Print

Subli-Print® MDF Coaster Square

Sublimation coaster made of sturdy MDF board approx. 3 mm thick and are approx. 95 x 95 mm in size.

The Subli-Print® MDF coasters are optionally available with cork backing and with a thickness of approx. 3,8 mm. The cork backing provides greater slip resistance and dampens noise during use.

The glossy print surface of the Subli-Print® MDF Coaster with cork is covered with a protective film which has to be removed before printing.

Instructions

The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.

Mirror subject Yes
Pressing temperature 185 °C
Pressing time 55 seconds
Contact pressure Medium, 2,5 - 3,0 Bar

Always carry out application tests on the original material.