Subli-Print® Metal Key Ring Bottle Opener
Product information
Subli-Print® Metal Key Ring Bottle Opener
Subli-Print® metal key ring with bottle opener, print area approx. 29 x 21 mm.
The Subli-Print® metal key ring is already self-adhesive and is supplied with a matching aluminium inlay with a white surface for printing. This eliminates the hassle of cutting double-sided adhesive film and there is no additional cost for the aluminium plates.
The Subli-Print® aluminium inlays come with a protective film that is removed before printing. The aluminium inlays are also available separately.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 180 °C |
| Pressing time | 45 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
Always carry out application tests on the original material.