Subli-Print® Multi Key Ring
Product information
Subli-Print® Multi Key Ring
With Subli-Print® Multi Key Ring, you don't just have one pendant on your keychain, you have two, three or as many as you like. The printable plates and the keyring with chain are available separately and can be combined in any way.
The pendants are made of 0,5 mm thick, flexible sublimation polyester and can be printed on both sides. Both sides are covered with a protective film which must be removed prior to transfer. The pendants can be supplied in the following shapes:
- Circle approx. 50 mm diameter
- Square approx. 50 x 50 mm
- Rectangle approx. 57 x 40 mm
- Heart approx. 50 x 50 mm
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 180 °C |
| Pressing time | 35 - 45 seconds |
| Contact pressure | Low, 1,5 Bar |
Always carry out application tests on the original material.