SUPERIOR Holostar HTV Mini Rolls
Heat transfer vinyl with Mirror, Crystal and Oil Slick Holo effect
- Tested for harmful substances by TÜV Rheinland
- Self-adhesive liner
- Thickness 70 microns
Product information
SUPERIOR Holostar HTV Flex Film
The SUPERIOR Mini Rolls are especially well-suited for eye-catching designs and creative projects.
All SUPERIOR Holostar HTV Flex Films are made from high-quality polyester and have a thickness of 70 µ. They come with a self-adhesive polyester carrier, allowing easy positioning and repositioning of plotted designs on textiles.
Certified Safe: All films have been tested by TÜV Rheinland and meet the extended legal requirements for textile and leather products in Germany (EU 07/2020).
SUPERIOR® Holostar HTV Mirror
Flex film with a high-gloss metallic surface, available in 9 vibrant effect colors.
SUPERIOR® Holostar HTV Crystal
Flex film with a holographic diffraction pattern that breaks the light into various colors as it moves. Available in Gold and Silver.
SUPERIOR® Holostar HTV Oil Slick Holo
An exceptional Oil Slick Flex film with a holographic surface that splits the light into rainbow colors.
Tested for harmful substances! Tested by TÜV Rheinland according to the extended legal requirements for textile and leather products in Germany EU 07/2020.
Please note that holographic films are made up of repeating patterns and have a line between the repeating patterns. This line is due to the manufacturing process and is not a reason for complaint.
Instructions
Please note that holographic films are made up of repeating patterns and have a line between the repeating patterns. This line is due to the manufacturing process and is not a reason for complaint.
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 150 °C |
| Pressing time | 8 - 10 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Hot |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 90 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.