SUPERIOR Holostar HTV Mini Rolls
Heat transfer vinyl with Mirror, Crystal and Oil Slick Holo effect
- Tested for harmful substances by TÜV Rheinland
- Self-adhesive liner
- Thickness 90 microns
Product information
SUPERIOR Holostar HTV Heat Transfer Vinyl
The SUPERIOR Holostar HTV Mirror, Crystal and Oil Slick Holo flex films are effect flex films for very eye-catching textile lettering on T-shirts, bags and casual wear.
All SUPERIOR Holostar HTV flex films are made of polyester and have a material thickness of 90 microns. They have a self-adhesive liner that allows easy positioning on the textile and repositioning of designs.
Tested for harmful substances! Tested by TÜV Rheinland according to the extended legal requirements for textile and leather products in Germany EU 07/2020.
SUPERIOR® Holostar HTV Mirror
Flex film with high gloss metallic surface in 9 effect colours.SUPERIOR® Holostar HTV Crystal
Flex film with holographic diffraction pattern, light is refracted in different colours when moving. Available in gold and silver.SUPERIOR® Holostar HTV Oil Slick Holo
No ordinary Oil Slick flex film - SUPERIOR® Oil Slick Holo has a holographic surface that refracts light in rainbow colours.
Please note that holographic films are made up of repeating patterns and have a line between the repeating patterns. This line is due to the manufacturing process and is not a reason for complaint.
Instructions
Please note that holographic films are made up of repeating patterns and have a line between the repeating patterns. This line is due to the manufacturing process and is not a reason for complaint.
The following information is intended as a guide and may vary due to tolerances (material properties, blade wear, etc.). A test cut is required at each roll change and wash tests are recommended.
Pre-press at full press temperature for 2-3 seconds and wash inside out at least 24 hours after pressing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 150 °C |
| Pressing time | 8 - 10 seconds |
| Contact pressure | Medium, 2,5 - 3,0 Bar |
| Pull off the backing material | Hot |
| Washable up to | 40 °C, no softener, do not tumble dry |
| Knife / Tool | 45° | Cricut: Premium Fine Point | Cameo: Autoblade | Juliet: 45° |
| Knife pressure | 90 g | Cricut: - | Cameo: 6 | Juliet: 5-10 |
| Preset | Cricut: Heat Transfer (Non-Cricut) | Cameo: Heat Transfer Smooth |
Always carry out application tests on the original material.